R430 Memory Slots
The Dell PowerEdge R430 is a 2U rackmount server which supports; Intel Xeon E5-2600 v3 or Intel Xeon E5-2600 v4; 12 DDR4 Sticks up to 64GB with LRDIMM or 32GB RDIMM per stick. R430 R330 R230 R630. Platform Description Processor(s) Memory PCI slots Embedded NICs Hard drives OEM platform options High-performance 5U, 2-socket rackable. Accelerate performance and grow memory capacity throughput with 12 DIMM slots and DDR4 memory. Boost I/O performance with up to 10 high-IOPS hard drives and two PCIe 3.0 I/O slots, driving 2x data throughput compared to previous generations. Memory: Up to 384GB (12 DIMM slots, 6 per processor): 4GB/8GB/16GB/32GB DDR4 up to 2400MT/s, actual memory speed dependent on the processor capability. I/O Slots: 2 x PCIe 3.0 slots + 1 slot for internal storage.
| Environmental specifications | |
|---|---|
NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets. | |
| Temperature | |
| Storage | –40°C to 65°C (–40°F to 149°F) |
| Continuous operation (for altitude less than 950 m or 3117 ft) | 10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment. |
| Fresh air | For information on fresh air, see Expanded Operating Temperature section. |
| Maximum temperature gradient (operating and storage) | 20°C/h (36°F/h) |
| Relative humidity | |
| Storage | 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times. |
| Operating | 10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew point. |
| Maximum vibration | |
| Operating | 0.26 G rms at 5 Hz to 350 Hz (all operation orientations). |
| Storage | 1.88 G rms at 10 Hz to 500 Hz for 15 min (all six sides tested). |
| Maximum shock | |
| Operating | Six consecutively executed shock pulses in the positive and negative x, y, and z axes of 40 G for up to 2.3 ms. |
| Storage | Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms. |
| Maximum altitude | |
| Operating | 3048 2000 m (10,000 6560 ft). |
| Storage | 12,000 m (39,370 ft). |
| Operating temperature de-rating | |
| Up to 35 °C (95 °F) | Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m (3,117 ft). |
| 35 °C to 40 °C (95 °F to 104 °F) | Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 m (3,117 ft). |
| 40 °C to 45 °C (104 °F to 113 °F) | Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 m (3,117 ft). |
| Particulate contamination NOTE: This section defines the limits to help avoid IT equipment damage and/or failure from particulates and gaseous contamination. If it is determined that levels of particulates or gaseous pollution are beyond the limits specified below and are the reason for the damage and/or failures to your equipment, it may be necessary for you to re-mediate the environmental conditions that are causing the damage and/or failures. Re-mediation of environmental conditions will be the responsibility of the customer. | |
| Air filtration NOTE: Applies to data center environments only. Air filtration requirements do not apply to IT equipment designed to be used outside a data center, in environments such as an office or factory floor. | Data center air filtration as defined by ISO Class 8 per ISO 14644-1 with a 95% upper confidence limit. NOTE: Air entering the data center must have MERV11 or MERV13 filtration. |
| Conductive dust NOTE: Applies to data center and non-data center environments. | Air must be free of conductive dust, zinc whiskers, or other conductive particles. |
| Corrosive dust NOTE: Applies to data center and non-data center environments. |
|
| Gaseous contamination | |
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity. | |
| Copper coupon corrosion rate | <300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985. |
| Silver coupon corrosion rate | <200 Å/month as defined by AHSRAE TC9.9. |
Standard Shipping
Buyer is responsible for paying all related shipping and handling charges unless otherwise noted in the item description. Shipping costs are determined at checkout by zip code and by shipping method chosen. A nominal handling charge is included to cover the cost of packaging materials. If the buyer provides a PO Box, items are mailed through the U.S. Postal Service. Special shipping arrangements such as companies not listed, local pickup and freight services may be available upon request.
MSU Surplus Store ships to U.S. addresses only.
R430 Memory Slots Upgrade
Local Pickup
There is no charge for local pickup. Customers will be able to select curbside pickup time slots when purchasing goods online. Pickup times are between 8:00 am and 3:00 pm, Monday through Friday. Customers are given 10-minute windows to pick up their items.
R430 Memory Slots Games
Freight Shipping
Due to the size and weight of certain items, we offer customer arranged freight shipping. The buyer is responsible for the arrangement and payment of all related shipping and handling charges. Palletizing, crating, shrink wrapping and banding services are available for a fee.
Standard Sales
R430 Memory Slots App
All items are offered for sale on an as-is basis with no warranty or guarantee. All sales are final, and there are no returns. We employ due diligence to ensure accurate item descriptions are placed online and the MSU Surplus Store staff are available to answer questions with regards to condition and/or contents prior to purchase. Please contact us with any questions regarding item condition or contents of the listing.